Cable

Application Primary power and distribution circuits in industrial and commercial installations, power circuits in generating plants where line to ground fault current are within shield capabilities. May be used in wet or dry locations, installed in underground, duct, or direct burial.

The single-core cables are designed for distribution of electrical power with nominal voltage Uo/U ranging from 3.8/6.6KV to 19/33KV and frequency 50Hz.They are suitable for installation mostly in power supply stations, indoors and in cable ducts, outdoors, underground and in water as well as for installation on cable trays for industries, switchboards, and power stations

For use as general-purpose wiring for installation in conduit or other recognized raceway. THHN wire may also be used for machine tool, appliance, and control circuit wiring. Read on below for THHN wire specs.

Low voltage 0.6/1KV Copper Or Aluminium Conductor Armoured Or Unarmoured Power Cable

APPLICATIONS
Electrically driven machines, movable electric apparatus in hazardous areas. For small pumps, fans, drills 2.5
mm2. For shuttle cars 16 mm2. Types 16, 25 mm2 suitable for reeling

Electrically driven machines, movable electric apparatus in hazardous areas

Flexible Copper Screened Mining Cable Type 61B

These Type 441 Class 2 Mining cables are designed for many uses, suitable for trailing and also suitable for reeling applications, have one central pilot and a semi conductive cradle supporting and protecting the power cores, which makes these cables less likely to be damaged from crushing and squashing.

Production standard: UL 719
1.Conductor: annealed copper, comply to ASTM B3
2.Insulation: PVC, type THHN.
Color for 2 conductors: white, black;
Color for 3 conductors: white, black, red
3.Wrapping: kraft paper tape over the grounding conductor
4.Core jacket: Nylon
5.assembly: the conductor laid parallel, with kraft paper tape wrapped.
Jacket: PVC, flame retardant. 90℃

We are a professional indoor PVC insulated cablee product manufacturer in China. A positive corporate culture and attention to detail are the core driving force for our company's development and service to each customer. Our PVC Insulated Flexible Cable has a world-leading manufacturing level and a reasonable price. We are always ready to provide you with quality products and perfect service. Please write to us for more information about PVC sheathed insulated cable.

PVC insulated wires are suitable for laying at the fixed places for rigid conductor, and can mobile use for flexible class 5 conductor. It is widely used in connecting of power device, lighting, daily electrical appliance, instrument etc. with AC rated voltage up to and including 450/750V(U0/U).

EPDM Insulated, Lead And EPDM Sheath, Galvanized Steel Tape Armoring, Round Cable For Submersible Oil Pump

EPDM Insulated, Lead Sheathed and Galvanized Steel Tape or Monel Steel Tape Armoring, Flat Cable for Submersible Oil Pump

RFOU mud-resistant cable is ideal for the fixed installation of power, control and lighting circuits in both explosion EX and safe areas been halogen free and with an outer sheath that can withstand been exposed to mud and drilling and cleaning fluids.

APPLICATION: 0.6/1 kV XLPE Insulated, LSOH (SHF1) Sheathed Flame Retardant Power & Control Cables 0.6/1 kV IEC60092 STANDARD Offshore & Marine unarmoured power & control cables are used on board of ships in all locations for fixed installations not subject to mechanical risk complying with IEC standards 60092-352. These cables are flame retardant, low smoke & halogen free.

APPLICATION: 0.6/1 kV IEC60092 STANDARD Offshore & Marine armored cables are used on board of ships in all locations for fixed installations where cable protection is required. These cables are flame retardant, low smoke & halogen-free.

The photovoltaic cable is mainly used in the line-line photovoltaics equipment systems under a maximum 1.5 kV DC voltage with safety class II. It should have the characteristics of ozone and weather resistance, UV resistance, acid and alkali resistance, cold resistance, high wear, and abrasion resistance, halogen-free, and flame retardant. It should also be compatible with standard joint and connection system.

Solar PV Cable is rated 600,1000 or 2000 V,and is suitable for ac and dc systems.This wire is rated 90,105,125 or 150℃ dry and 90℃ wet. UL PV Cable employs 12 AWG-2000 kcmil stranded aluminum or copper-clad aluminum,or 18 AWG-2000 kcmil stranded copper,tined copper conductors.

This product is manufactured according to GB/T9330, IEC60227 and IEC60502, etc.

AAAC is mainly used as bare overhead transmission cable as well as primary and secondary distribution cable. It is also suitable for laying across basins, rivers and valleys where special geographical textures exist.

AAC conductor is also known as an aluminum stranded conductor. It is manufactured from electrolytically refined aluminum, with a minimum purity of 99.7%.

ACSR conductors are widely used for electrical power transmission over long distances since they are ideal for long overhead lines spans. They are also used as a messenger for supporting overhead electrical cables.

These cables are designed to provide high flexibility and have the capacity to withstand weather, oil/grease, mechanical and thermal stresses. Applications include handling equipment, mobile power supplies, worksites, stage and audio visual equipment, port areas and dams. Also for use in drainage and water treatment, cold environments and severe industrial environments.

Cable of normal flexibility grade,used as high voltage insulated conductor from electrical welding machine to electrodes,i.e. as earth connection.In addition to hand welding,it can be also applied in automobile industry,shipbuilding,transport systems,production lines,tool manufacturing,welding robots.These cables retain their high flexibility also under the influence of ozone,light,oxygen,protective gases,oils and gasoline.Due to their robust construction,they are also resistant to cold,same as to heat and fire.Suitable for outdoor use,but also in dry and damp conditions.

Aerial Bundled Conductor cables can be used to replace bare conductor cables in overhead distribution systems. It is ideal for use in urban areas with congested power distribution and narrow lanes and by-lanes. The flexible system is much easier than conventional overhead power lines to re-route when demanded by changes in urban development plans.

1. Application: MV aerial bundled cables are mainly used for secondary overhead lines on poles or as feeders to residential premises.
2. Standards: Basic design to IEC 60502 / AS/NZS 3599-1 standards.